Small incremental moves (nudges) can be made by pressing the increment key:
Every time the [<±>] key is pressed, the stop moves one increment in the direction indi-
cated.
The increment key is actually two keys in one.
Press the Left Arrow side of the key to nudge the stop to the left.
Press the Right Arrow side of the key to nudge the stop to the right.
The value of Increment is set as the last step in setting the distance between the stop and the
blade.
Saving Dimensions with List
•SawGear lets you save dimensions you are working with by storing up to 9 lengths in each
of 10 cut lists.
The messages shown below SCROLL across the screen if longer than the LCD's 16
1. Press [List].
2. Enter [5].
Or any number from 0 to 9.
The screen displays "List#" followed by the number you entered. If this is NOT the list
number you want, exit by pressing [STOP]. If the list number you entered is correct...
3. Press [Start].
The first cut displays with "Empty Cut" to tell you this list is empty. Enter your first
dimension.
SawGear will move to each new dimension as it is entered, so be sure nothing is in the way.
4. Enter [4] [8] and press [Start].
24
Increment
character width.
SawGear is in Foot mode for these examples.
20