Sawgear Lcd Display; 1St Power Up - SawGear SGTAB04 Manual

Display Size:
•16 characters wide x 1 character high
Ready Screen:
•Defined as when the stop is at position and the last 2 digits are blinking (heartbeat).
Display at Position in Foot Mode:
•Fractions divided from whole inches by an under-
score.
•Feet divided from inches by "Ft" and a space.
•"in" for inches ALWAYS at end.
•"in"and "IN" blink back and forth.
Display at Position in Metric Mode:
•"mm" for millimeters ALWAYS at end.
•"mm"and "MM" blink back and forth.
Switch between Inches and Metric
•Press then press
The following routine is followed only the first time SawGear is used, or whenever the interface
language, measuring system, saw side or working length must be changed.
The messages shown below SCROLL across the screen if longer than the LCD's 16 char-
acter width.
1. Plug into AC power. Press [Soft
Start].
2. Select language when prompted.
SawGear can display text in English,
Spanish, French, Dutch, German and Italian.
3. Press [4] or [6] to select measure-
ment system.
4. Press [7] if the saw is to the left of
SawGear, or [9] if the saw is to the right.
5. Press [Start] to move.

SawGear LCD Display

1st Power Up

9
13