Sawgear Control - SawGear SGTAB04 Manual

SawGear Control

[Soft Start] switches off power to save energy.
[W] Molding Width Entry for cutting 45° miters.
[X] Left Stile Inside Length Entry for miters.
[Y] Header Inside Length Entry for miters.
[Z] Right Stile Inside Length Entry for miters.
[Ft] Feet Entry denotes numbers as Feet.
[In] Inches Entry denotes numbers as Inches.
[/] Slash is used to enter fractional numbers.
[<±>] Increment adds or subtracts from current
position by a given amount.
[List] List stores dimensions for later use.
[-D-] Calibrate sets the distance from the saw
blade. Also used to set or kill sleep mode.
[STOP] Stop halts movement immediately.
[Start] Start accepts an entered dimension, and
causes movement.
[Clr] Clear backs up and erases one digit at a time to correct a data entry error.
Also used to clear a cut length.
[.] Decimal is used to enter decimal numbers in both metric and inches.
[.] [.] [.] inserts a minus sign before a dimension, allowing entry of negative numbers
[n] Number keys are used to enter dimensions.
12
8