Mechanical Installation; Mounting The Drive - Siemens SINAMICS V60 Getting Started Manual

2.1 Mechanical Installation

2.1.1 Mounting the drive

Drill pattern and outline dimensions
Mounting method
You mount the drive with four M5 screws to the inner wall of the cabinet. Note that the drive
must be mounted vertically to the cabinet wall, with the ventilation openings of the drive
pointing upwards. The screw tightening torque of the drive must be no more than 2.0 Nm.
Minimum mounting clearance
To ensure sufficient heat dissipation, please observe the requirements for minimum
clearance between drives, one drive and another device/inner wall of the cabinet, as
illustrated in the picture below:
EN-10
93
80
5.5
4 A/ 6 A / 7A versions
80
110
5.5
10 A version
SINAMICS V60 Controlled Power Module (CPM60.1) Getting Started
185 106
RDY / JOG
ERR
185
123
RDY / JOG
ERR
2