General Information; System Overview - Siemens SINAMICS V60 Getting Started Manual

General Information

1.1 System Overview

The SINAMICS V60 servo drive system is a new drive system developed by Siemens. It's designed for
use with a Siemens SINUMERIK 801 or SINUMERIK 802S base line numerical controller to control the
operation of a CNC turning or milling machine, and it can also be connected with a Siemens SIMATIC
PLC. Siemens delivers to each customer the whole drive system instead of only one drive device, which
includes: a drive module (CPM60.1, available in 4 A, 6 A, 7 A or 10 A version), an AC servo motor (type
1FL5, with or without a built-in brake and with or without a key ) and all necessary cables (for power,
encoder and brake, with a length of 5m or 10m).
The following picture illustrates possible system configuration
4 A/6 A/7 A
Motor with brake
S N I A M C I S V 6 0 C o t n o r e l l d
or
10 A
or
Motor without brake
P o w r e M o d u e l ( C P M 6 . 0 ) 1
Setpoint cable
G e t t n i g t S r a e t d
SINUMERIK 801
or
SINUMERIK 802S base line
E N 3 -