Table of Contents
Advertisement
This function is to enter the programing mode
"Settings"
required at the time of installation. This button
serves as the "Save" button.
(Curved Arrow)
This function is to initiate a regeneration. This
"Cycle"
button also unlocks each parameter to be
changed in the programming mode.
(Triangle Arrows)
DOWN / UP Increase or decrease the value of the settings
while in the programming mode.
IMMEDIATE REGENERATION
To start an immediate regeneration, press
and hold the "Cycle" button. Button for 3-5
seconds. The valve will start an immediate
regeneration.
Time of Day
Status
Remaining Hours
Before Regen.
Key Pad Configuration
Manual Regeneration Initiation
15:30
10:30
Installation, Operation and Maintenance Manual
DELAYED REGENERATION
To queue a delayed regeneration push and
release the "Cycle" button. The on screen
03-d
8
AQF-CX-100 & AQF-CX-200
Regeneration Mode
Days Between Regen.
Advertisement
Table of Contents
