Establishing The Configuration Task; Optional) Enabling The Information Center - Huawei Quidway S9300 Configuration Manual

2 Information Center Configuration
2.4.7 Outputting Debugging Information to the Log Host
By outputting debugging messages to the log host, you can view debugging messages more
conveniently.
2.4.8 Checking the Configuration
After configuring the debugging message output, you can view the configuration of the
information center.

2.4.1 Establishing the Configuration Task

Before configuring the debugging message output, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Applicable Environment
When faults occur on a device, you can enable the information center to output debugging
information for easy faults location and analysis.
Pre-configuration Tasks
Before enabling the output of debugging information, complete the following tasks:
l
l
Data Preparation
To enable the output of debugging information, you need the following data.
No.
1
2
3
4

2.4.2 (Optional) Enabling the Information Center

By default, the information center is enabled. You can enable the information center in the event
that the information center is disabled.
Context
Classifying and outputting a large amount of information affects the performance of the system.
Do as follows on the switch.
2-26
Connecting the switch and the PC correctly
Configuring routes between the switch and the log host
Data
l Channel number
l Channel name
Module name
Severity level of debugging information
IP address of a log host
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Issue 01 (2010-12-15)