Establishing The Configuration Task; Resetting The Lpu; Checking The Configuration - Huawei Quidway S9300 Configuration Manual

3 Hardware Management

3.7.1 Establishing the Configuration Task

Before resetting an LPU, familiarize yourself with the applicable environment, complete the
pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
Applicable Environment
When the LPU fails to be upgraded or fails to work normally, you need to reset the LPU.
Pre-configuration Tasks
None.
Data Preparation
To reset the LPU, you need the following data.
No.
1

3.7.2 Resetting the LPU

When an LPU fails to be upgraded or fails to work normally, you need to reset the LPU.
Context
When the LPU works abnormally, try to find and remove the fault rather than resetting the LPU
directly to avoid service interruption.
Do as follows on the S9300 whose LPU needs to be reset:
Procedure
Step 1 Run:
reset slot slot-id
The LPU in the specified slot is reset.
This command can be run in any view. By default, the LPU can be reset only by the users at the
configuration level and the management level.
----End

3.7.3 Checking the Configuration

After an LPU is reset, you can check the LPU status and resetting cause.
3-10
Data
Slot number of the LPU to be reset
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Issue 01 (2010-12-15)