Snom D765 User Manual page 30

http://arttel.ru
D765 | snom 760 User Manual
Adjusting the display settings on the connected expansion modules
The intensity of the backlight on the displays can be adjusted separately for the phone and the
connected expansion modules, both for the times when the phone is active and when the phone is idle.
Lowering backlight intensity lowers the energy consumption of the devices.
Note: The number of seconds after which the expansion modules will switch from activity
to idle backlight is the number set for the phone display's backlight (see "Adjusting the
backlight on the phone's display" on page 29).
• Adjusting the intensity of the backlight.
1. Press
2. Press 1 Preferences.
3. Press 5 Display.
4. Press 3 Expansion Modules.
5. Press 2 Backlight on activity or 3 Backlight when idle.
6. Press right or left arrow on the navigation key to increase ( ) or decrease ( ) the backlight's
intensity. The setting applies to all expansion modules connected to the phone.
7. When done, press
Fig. 4
• Adjusting the appearance of the data on the display (tiles or lines; for more information, see the
D7 User Manual, chapter Display layout.
1. Press
2. Press 1 Preferences.
3. Press 5 Display.
4. Press 3 Expansion Modules.
5. Press 1 Appearance.
6. Press 1, 2, and/or 3 to change and simultaneously save the display layout of the first, second,
or third connected expansion module, respectively, from lines to tiles and vice versa (Fig. 7).
7. When done, press
8. Press 4 Contrast.
9. Press right or left arrow on the navigation key to increase ( ) or decrease ( ) the backlight's
intensity. The setting applies to all expansion modules connected to the phone.
10. When done, press
http://arttel.ru/shop/ip-telefony/snom-d765
.
to save and return to Expansion modules menu (Fig. 4).
Fig. 5
.
to save and return to Expansion modules menu (Fig. 4).
to save and return to Expansion modules menu.
Getting to Know Your Phone
Fig. 6
30
Fig. 7