Launch X-631 Plus User Manual page 34

LAUNCH
According to the prompts on the screen, please click
[NEXT] button to sample data. The interface is as
shown in Fig.4.68.
According to the prompts on the screen, switch on the
power supplies of FL and RL probe rods, and switch
off the power supplies of FR and RR probe rods, and
then click [NEXT] button. The interface is as shown in
Fig.4.69.
According to the prompts on the screen, please click
[NEXT] button to sample data. The interface is as
shown in Fig.4.70.
X-631/X-631+ Wheel Aligner
Fig.4.67
Fig.4.68
4.69
According to the prompts on the screen, install 4
probe rods and adjust them level, switch on all power
supplies of probe rods, and then click [NEXT] button.
The interface is as shown in Fig.4.71.
According to the prompts on the screen, please click
[NEXT] button to sample data. The interface is as
shown in Fig.4.72.
According to the prompts on the screen, exchange
the probe rods of left side with that of right side and
adjust all probe rods level. Switch on all power
supplies of the probe rods, and then click [NEXT]
button. The interface is as shown in Fig.4.73.
4-19
Operation Instructions
4.70
Fig.4.71
Fig.4.72