Launch X-631 Plus User Manual page 21

LAUNCH
FR wheels, and input them into the corresponding data
boxes respectively, and then click [Return]. The interface
is as shown in Fig.4.14.
Fig.4.14
[HELP for vehicle adjustment]: Click this button, the
screen will pop up an interface of [HELP for vehicle
adjustment], the different kingpin adjusting methods for
various vehicle models have been enumerated in this
interface for vehicle adjustment, the operator can
perform the kingpin adjustment operation according to
the operating methods in the HELP interface. The
interface is as shown in Fig.4.15
Fig.4.15
[Detailed data]: This interface provides the result outputs
for whole testing operations, which includes the
measured values of each parameter for front and rear
wheels. The interface is as shown in Fig.4.16.
Fig.4.16
[Figure format]: Figure format data display mode is
newly added in the system. Click [Word Format] button
to switch it between Traditional Data Format and
newly-added Figure Format. The interface is as shown
X-631/X-631+ Wheel Aligner
4-6
in Fig.4.17.
Fig.4.17
Caution:
1. Before perform kingpin measurement, please
install brake pedal depressor and lock the hand
brake first, in order to ensure the vehicle wheels
cannot move; remove the steering wheel holder
finally.
2. The steering angle for [Kingpin Steering
Operation] can be set on the interface of [System
Setting]. The standard kingpin measurement is
the measurement of 20-degree-steering. But in
some special
measurement can be selected when the steering
angle cannot be up to 20 degrees.
3. The measured values are displayed with different
colors on each measurement interface.
z
Green, it indicates that the measured values
are within the standard specifications.
z
Red, it indicates that the measured values
are beyond the standard specifications.
z
Blue, it indicates that this measured
parameter
specification.
Rear axle measurement
This interface can provide the real-time result related to
rear axle measurement, the operator can compare the
measurement result with the reference data while
adjusting the vehicle, until the vehicle is adjusted to the
best status. The interface is as shown in Fig.4.18.
HELP for vehicle adjustment
Fig.4.18
Operation Instructions
Language format
cases, 10-degree-steering
has not the standard
Double click
Put up the vehicle body