Configuring The Modem Settings For The Sunny Webbox; Connecting The Sunny Webbox To The Inverter; Connecting The Sunny Webbox To A Sunny Central - SMA SUNNY WEBBOX User Manual

6 Commissioning

6.8.3 Configuring the Modem Settings for the Sunny WebBox

The following section provides information on how to set up your analog modem.
1. Select "WebBox > Settings > Modem" in the user interface.
2. In the "Allow modem access" field select "yes". This allows the establishment of a remote data
transmission connection to the Sunny WebBox.
3. Enter the telephone number of your Internet Service Provider (ISP) in the "ISP telephone number"
field. You will find this information in your service provider documentation.
4. Enter the data received from the ISP in the "ISP User Name" and "ISP Password" fields.
5. Test the connection as described in Section 10.5.2.
6. Select [Save].
☑ The modem is now configured.

6.9 Connecting the Sunny WebBox to the Inverter

This section describes the following methods for connecting the Sunny WebBox to inverters:
• Connecting the Sunny WebBox to a Sunny Central via Ethernet (maximum 50 inverters)
• Connecting the Sunny WebBox to an inverter via RS485 (maximum 50 inverters)

6.9.1 Connecting the Sunny WebBox to a Sunny Central

The Sunny WebBox is connected to the Sunny Central via Ethernet. Configure the Sunny WebBox for
the local network and connect the Sunny WebBox directly to the remote terminal (e.g., router, switch
or hub) of the Sunny Central via the red network cable (patch cable).
32 SWebBox-BA-US_en-34
SMA America, LLC
User Manual