Table of Contents
Advertisement
14 System Management
☐ The new Sunny Home Manager must be supplied with voltage (see the installation manual of the
Sunny Home Manager).
☐ You must be a system administrator (see Section 17.1, page 107).
Procedure:
1. Open www.SunnyPortal.com and select PV System Setup Assistant.
or
Go to www.SunnyPortal.com/Register.
☑ The PV System Setup Assistant opens.
2. Select [Next].
☑ The page User registration opens.
3. Activate the checkbox I am already registered in Sunny Portal.
4. Enter the e-mail address and the Sunny Portal password in the fields E-mail address and Password.
5. Select [Next].
☑ The page Select PV system opens.
6. Activate the field Add or replace devices.
7. Select
in the line of the Sunny Home Manager system for which you want to replace the
Sunny Home Manager.
8. Select [Next].
☑ The page Select devices opens.
9. Enter the serial number of the Sunny Home Manager in the field PIC. Enter the registration ID of the
Sunny Home Manager in the field RID.
10.
Reading off the serial number and registration ID
You can read off the serial number and the registration ID at the following locations:
• On the type label at the back of the Sunny Home Manager
• On the label included in the delivery
11. Select [Identify].
☑ Sunny Portal checks whether the serial number and registration ID correspond to the connected
Sunny Home Manager.
✖ The PV System Setup Assistant cannot find any Sunny Home Manager with the serial number and registration
ID?
An error has occurred.
• Eliminate the error (see Section 19, page 112).
12. Select [Next].
13. Select [Finish].
14.4
Reassigning the Sunny Home Manager to the Sunny Portal System
after the Reset
If you have performed a complete reset of the Sunny Home Manager, you must reassign the Sunny Home Manager to
your Sunny Home Manager system in Sunny Portal. Otherwise, Sunny Portal will not accept any data from the
Sunny Home Manager.
86
HM-20-BE-en-10
SMA Solar Technology AG
Operating Manual
Advertisement
Table of Contents
