The module operates according to the IEEE 802.15.4 specification and can be configured to minimize the possibility of interference with other devices. The module receives RF signals from one or more Crestron devices and can transmit these signals over the air for further processing (depending on the application).
Two-Way RF Transceiver Module Crestron CWD6660 Specifications The table below is a summary of specifications for the CWD6660. Specifications of the CWD6660 SPECIFICATION DETAILS Power Requirements 1.6 Watts (5VDC @ 0.32A) Operating Frequency 2400 MHz to 2483.5 MHz (802.15.4 compliant) Operating Ranges¹...
Page 7
NOTE: Pin 1 provides power to the circuit card. Power/I-O Pinout Signals Pin # Signal Pin # Signal WAKE +3V (NU) LINK_ACTIVITY +3V (NU) HOST_INT SSEL_INT SCLK MISO MOSI RF_RESET_N Two-Way RF Transceiver Module: CWD6660 • 3 Operations Guide - DOC. 7028A...
20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” 4 • Two-Way RF Transceiver Module: CWD6660 Operations Guide - DOC. 7028A...
Need help?
Do you have a question about the CWD6660 and is the answer not in the manual?
Questions and answers