Radio Channels; Trx7370 Radio Card Parameters - Psion Teklogix 9150 User Manual

Chapter 4: Base Station Configuration
Narrow Band Radio Parameters
4.2.2.3

Radio Channels

Active Channel
This parameter determines the operating radio channel of the 9150. The channel
selected must be an enabled channel. Refer to Enabled Channels, below, for details.
Enabled Channels
This parameter is used to enable (
number of channels supported by the TRX7370 radio. Enabling a channel allows the
channel to be set to an operating channel (Active Channel) and also makes the
channel available for channel searching. If, for example, the operating channel is 1
and all other channels are enabled, terminals may roam through all 20 channels.
Note that the Enabled Channels menu only displays channels that have been config-
ured with frequencies. See page 62 for the list of associated frequencies.
4.2.2.4

TRX7370 Radio Card Parameters

Entering the "Get Card Parameters" dialog box will open the list of General, Fre-
quencies, and Tuning Values parameters for the TRX7370 Narrow Band PC card
radio. These manufacturer's settings are not configurable. The settings are shown on
pages 62 and 63.
60
Teklogix 9150 Wireless Gateway User Manual
√
) or disable up to 20 channels – the maximum