System Parameters; Snmp Communities; Trap Receivers; Tcp/Ip Parameters - Psion Teklogix 9150 User Manual

Chapter 3: 9150 Main Configuration

TCP/IP Parameters

3.4.3.1

System Parameters

The entries in these parameters set the name, contact and location identifiers for
this specific 9150 Wireless Gateway. The name and location are then shown as the
sub-heading of each Configuration page. In this example the identifier appears as
"Unit 12 [Warehouse A: Pillar 32B]".
3.4.3.2

SNMP Communities

These parameter settings allow the network administrator to define the network
environment and determine the type of access allowed (read-only, or read-write) for
each area name and IP address.
3.4.3.3

Trap Receivers

These IP addresses determine which SNMP manager's stations will receive SNMP
Traps from the 9150. The 9150 sends the "Cold Start" Trap on reboot or power up.

3.4.4 TCP/IP Parameters

The 9150 is situated on a wired network which uses TCP/IP. Both Bootp and DNS
options are available to resolve IP addressing issues.
36
Teklogix 9150 Wireless Gateway User Manual