Host Table - Psion Teklogix 9150 User Manual

Chapter 3: 9150 Main Configuration
TCP/IP Parameters
3.4.4.1

Host Table

If no external DNS server is available, the 9150 may resolve host names to IP
addresses using its internal host table. Hosts are added to the table by selecting
"Configure" beside "[#} Add Entry" in the listbox. This will open the New Host
Table Entry menu.
An existing host's name and IP address may be edited in the Host Table Entry menu
by selecting "Configure" beside the host name in the listbox. The host may also be
deleted from the table.
Name
This is the designated name of the host.
IP Address
This is the assigned IP address for the host.
Note: The name must not contain space characters.
37
Teklogix 9150 Wireless Gateway User Manual