Radio Link Features - Psion Teklogix 9150 User Manual

Wireless
Hide thumbs Also See for 9150:
Table of Contents

Advertisement

Chapter 4: Base Station Configuration

Radio Link Features

Message Size
Message Size determines the largest single message that can be passed to a
terminal. The range of this parameter is between 32 and 380 characters. (Longer
messages are broken into several packets.) For polling protocol base stations, the
upper limit is 116.
Auto-Startup
When this parameter is enabled (
the master 9150 boots up. When Auto-Startup is disabled, the base stations will not
start polling until they receive a start polling command from the host.
4.6 Radio Link .eatures
From the Radio Link Features option under Base Station Configuration (see
Figure 4.2 on page 48), entering "Configure" will open the "Radio Link Features"
page for the polling and cellular parameters.
Operate in Cellular Mode
To operate as a Wlan base station, this parameter should be enabled (
further information see "Wlan Protocol" on page 8.
Note: The 9400 or 9300 Network Controller must also be set to cellular mode.
72
Teklogix 9150 Wireless Gateway User Manual
), the slave base stations will start polling when
). For

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents