Status Indicators (Leds); Preparing For Lan Installation - Psion Teklogix 9150 User Manual

Chapter 2: Installation Requirements

Status Indicators (LEDs)

2.2.2 Status Indicators (LEDs)

The 9150 has six status indicators on the front of the enclosure. These numbered and
coloured LEDs indicate the operating status for each port:
LED
Number
1 Ethernet link
2 Ethernet activity
3 PC Card A status
4 PC Card B status
5 SLIM
6 Power
1
For 10Base2 and 10Base5: LED 1 is always OFF when these connections are used.
2
When a TekLAN 902 MHz radio is installed, the PC Card status LEDs blink only when
data is received from or transmitted to a terminal. When a TRX7370 narrow band radio is
installed, these LEDs blink for all received and transmitted data traffic.
3
When a Token Ring PC card is installed, LED #4 shows Token Ring activity.
4
Built-in Self-Test.
2.2.3 Preparing .or LAN Installation
Because the 9150 provides Ethernet or Token Ring connectivity, it can be added to
an existing LAN. Generally, LAN installations are handled with the help of the
network administrators, as they are familiar with their network and its configuration.
Once the 9150 is installed, connected and powered on, the system administrator
can access the unit to check the configuration and to assign the 9150 its unique IP
address. This may be done through the Console port or through the network (see
"Connecting A Video Display Terminal" on page 21 and "Changing The Configura-
18
Teklogix 9150 Wireless Gateway User Manual
Name
Link indicator for 10base-T:
1
ON = good link; OFF = no link
Ethernet LAN activity (Rx/Tx)
2
PC Card A activity (Rx/Tx)
2,3
PC Card B activity (Rx/Tx; Token Ring)
SLIM card activity
LED flashing = BIST
LED On solid = BIST
LED Off = no power to unit
Table 2.1 LED .unctions
.unction
4
running/error detected
4
Passed
Colour
yellow
green
yellow
green
yellow
green