Separating The Sideblock Assembly From The Band Mask Frame - Kirby Morgan KMB-18 A/B Operation And Maintenance Manual

Fig. 6.23 Loosen the jam nut prior to removing the bent
tube.
Fig. 6.24 Pull the bent tube assembly straight out of the
regulator nipple.
Document # 010518001 © Copyright 1970-2003 Kirby Morgan Dive Systems, Inc. All rights reserved.
KMB 18 & 28 MANUAL
6.5.2.3 Separating the Sideblock Assembly
(120A/B) from the Band Mask Frame (17)
Tools Required:
Putty Knife
7/16 inch Open End Attachment on Torque
Wrench
1/4 inch Flat Blade Stubby Screwdriver
1) Remove the nut (22) and washer (23), then the
air train (21).
Fig. 6.25 Remove the nut and washer from the air train.
2) The stud nut (20) is removed next, with the lock
washer (19) and flat washer (18) on the 18A/B.
On the KMB 28 the stud nut (20), the lock washer
(19) and the air train standoff (24) would be
removed.
Fig. 6.26 Remove the stud nut.
page 63