Accessories; Hoods; Mask Carrying Bag; Communications - Kirby Morgan EXO original Operation & Maintenance Manual

Regulator full face mask
Hide thumbs Also See for EXO original:
Table of Contents

Advertisement

EXO Full Face Mask Manual

1.4 ACCESSORIES

There are a number of accessories for your EXO Full Face Mask designed to make your diving more
enjoyable and easier. Contact your nearest Authorized Diving Systems International dealer to order any
of the following items.

1.4.1 Hoods

Diving Systems International manufacturers a
hood perfectly tailored to the EXO-26 masks. It
has thinner face seal material on the front as
opposed to the thicker material of normal types
of hoods, for better comfort. Order DSI Part #:
310-030 Small, 310-031 Medium, 310-032 Large.
Cold Water (CW) versions are also available.
These have a large "bib" that tucks into the divers
wet suit. Order DSI Part #: 310-035 CW Small,
310-037 CW Medium, 310-039 CW Large
Three sizes of hoods are available

1.4.2 Mask Carrying Bag

To protect your mask during storage and trans-
port, use our Mask Carrying Bag. The bag holds
your mask as well as spares. The bag is not
intended for shipping your mask as cargo. Or-
der DSI Part #: 300-902, Mask Carrying Bag.
.
6

1.4.3 Communications

The mask may be used with wireless or hard
wire communications. Several different types
of communications modules can be ordered for
the EXO. For the cleanest communications, we
recommend you use only DSI replacement com-
munications earphones and microphones.
EXO Original
DSI Part #:
Description
315-201
Asembly With Binding Posts
315-206
With 4 Pin Waterproof Connector
EXO Standard and BR
DSI Part #:
Descript
315-210 Assembly With Binding Posts
315-215 With 4 Pin Waterproof Connector
Chapter 1
Document # 001026001

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exo standardExo balanced

Table of Contents