Tracert Mpls Ipv4 - HPE 12500 Series Command Reference Manual

Mpls, routing switch series
Table of Contents

Advertisement

Related commands

tracert mpls ipv4

tracert mpls ipv4
Use tracert mpls ipv4 to trace MPLS LSPs (from the ingress node to the egress node) for IPv4
prefixes.
Syntax
tracert mpls [ -a source-ip | -exp exp-value | -h ttl-value | -r reply-mode | -t time-out ] * ipv4
dest-addr mask-length [ destination destination-ip-addr-header ]
Views
Any view
Predefined user roles
network-admin
mdc-admin
Parameters
-a source-ip: Specifies the source address for the MPLS echo request packets to be sent. If you do
not specify this option, the primary IP address of the outgoing interface is the source address of the
MPLS echo requests.
-exp exp-value: Specifies the EXP value for echo request packets. The value range is 0 to 7, and the
default is 0.
-h ttl-value: Specifies the maximum TTL value for MPLS echo request packets, namely, the
maximum number of hops to be inspected. The value range for the ttl-value argument is 1 to 255,
and the default is 30.
-r reply-mode: Specifies the reply mode of the receiver in response to MPLS echo request packets.
The reply-mode argument can be 1 or 2, where 1 means "Do not reply" and 2 means "Reply by
using a UDP packet." The default is 2.
-t time-out: Specifies the timeout interval for the reply to an MPLS echo request. The value range is
0 to 65535 milliseconds, and the default is 2000 milliseconds.
ipv4 dest-addr mask-length: Specifies an FEC by an IPv4 destination address and the mask length.
The value range for the mask-length argument is 0 to 32.
destination destination-ip-addr-header: Specifies the destination address in the IP header of an
MPLS echo request. The destination address must be an address on subnet 127.0.0.0/8—any local
loopback address.
Examples
# Trace the path that the LSP (for FEC 3.3.3.9/32) traverses from the ingress node to the egress
node.
<Sysname> tracert mpls ipv4 3.3.3.9 32
MPLS Trace Route FEC: 3.3.3.9/32
TTL
Replier
0
1
10.4.5.1
2
100.1.4.2
Time
Type
Downstream
Ingress
10.4.5.1/[1025]
1 ms
Transit
100.3.4.1/[1024]
63 ms
Transit
100.1.2.1/[3]
150

Advertisement

Table of Contents
loading

Table of Contents