Mpls Oam Commands; Ping Mpls Ipv4 - HPE 12500 Series Command Reference Manual

MPLS OAM commands

ping mpls ipv4

Use ping mpls ipv4 to test MPLS LSP connectivity for IPv4 prefixes.
Syntax
ping mpls [ -a source-ip | -c count | -exp exp-value | -h ttl-value | -m wait-time | -r reply-mode | -s
packet-size
destination-ip-addr-header ]
Views
Any view
Predefined user roles
network-admin
mdc-admin
Parameters
-a source-ip: Specifies the source address for the MPLS echo request packets to be sent. If you do
not specify this option, the primary IP address of the outgoing interface is the source address of the
MPLS echo requests.
-c count: Specifies the number of MPLS echo request packets to be sent. The value range is 1 to
4294967295, and the default is 5.
-exp exp-value: Specifies the EXP value for echo request packets. The value range is 0 to 7, and the
default is 0.
-h ttl-value: Specifies the TTL value for MPLS echo request packets. The value range is 1 to 255, and
the default is 255.
-m wait-time: Specifies the interval for sending MPLS echo request packets. The value range is 1 to
10000 milliseconds, and the default is 200 milliseconds.
-r reply-mode: Specifies the reply mode of the receiver in response to MPLS echo request packets.
The reply-mode argument can be 1 or 2, where 1 means "Do not reply" and 2 means "Reply by
using a UDP packet." The default is 2.
-s packet-size: Specifies the length (excluding the IP header and UDP header) of the MPLS echo
request packets. The value for the packet-size argument is 65 to 8100 bytes, and the default is 100
bytes.
-t time-out: Specifies the timeout interval for the reply to an MPLS echo request. The value range is
0 to 65535 milliseconds, and the default is 2000 milliseconds.
-v: Displays detailed reply information. If you do not specify this keyword, the command displays
brief reply information.
ipv4 dest-addr mask-length: Specifies an FEC by an IPv4 destination address and the mask length.
The value range for the mask-length argument is 0 to 32.
| -t time-out | -v ] * ipv4 dest-addr
148
mask-length [ destination