Domain-Id - HPE 12500 Series Command Reference Manual

Table 31 Command output
Field
VPN-Instance Name
RD
Create Time
# Display detailed information about VPN instance vpn1.
<Sysname> display ip vpn-instance instance-name vpn1
VPN-Instance Name and ID : vpn1, 2
Route Distinguisher : 100:1
Description : vpn1
Interfaces : GigabitEthernet3/0/2
Ipv4-family:
Export VPN Targets :
2:2
Import VPN Targets :
3:3
Export Route Policy : outpolicy
Import Route Policy : inpolicy
Tunnel Policy : tunnel1
Maximum Routes Limit : 5000
Ipv6-family:
Export VPN Targets :
2:2
Import VPN Targets :
3:3
Export Route Policy : outpolicy
Import Route Policy : inpolicy
Tunnel Policy : tunnel1
Maximum Routes Limit : 5000

domain-id

Use domain-id to configure an OSPF domain ID.
Use undo domain-id to restore the default.
Syntax
domain-id domain-id [ secondary ]
undo domain-id [ domain-id ]
Default
The OSPF domain ID is 0.
Views
OSPF view
Description
Name of the VPN instance.
RD of the VPN instance.
Time when the VPN instance was created.
80