14. Install the fan cage.
15. If removed, do the following:
a. Install the air baffle (Installing the air baffle on page 43).
b. Install the processor mezzanine tray (Installing a processor mezzanine tray on page 87).
c. Install the 2P pass-through performance board (Installing a 2P pass-through performance board
on page 88).
16. Install the access panel (Installing the access panel on page 41).
17. Install the server into the rack (Installing the server into the rack on page 34).
18. Connect each power cord to the server.
19. Connect each power cord to the power source.
20. Power up the server (Powering up the server on page 38).
Installing the Mini-SAS cable
Cabling configurations and requirements vary depending on the product and installed options. For more
information on cable installation, see the following:
•
"Cabling on page 109" in this guide.
•
The documentation included with the hardware option kit.
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
102
Installing the Mini-SAS cable