TierTime UP BOX User Manual page 34

F o r e x a m p l e , s e t t i n g t h e
compensation value for calibration
point No.3. Assume the "platform
height" is 208.7 and the "nozzle
height" is 208, the compensation
value should be set to 0.7.
After setting 0.7 in the drop down
menu, the nozzle will move to point
No.3 and the platform will rise 0.7
mm. Now we can use the paper again
to verify the compensation value.
After setting all calibration points click
"Appy/Save Current Values " to finish
the calibration.
32