TierTime UP BOX User Manual page 31

Appendix A - Fine Manual Calibration
1. Setting nozzle height.
2. Setting compensation values.
Open: Menu - 3D Print - Platform Calibrate
1. Protocol for setting nozzle height:
1
Initialize printer
Put a print paper on the platform.
2
Open the calibration interface and
press the UP key, note the current
height value, stop the platform at
about 190.
3
A. Moving Platform UP/DOWN:
click/hold the button, platform
will move accordingly.
B. Display the current platform
height.
C. Setting nozzle height: click this
will set the current platform
height as the nozzle height.
D. 9 calibration point buttons,
represent 9 positions on platform,
after clicking them the nozzle
will move to the corresponding
positions. The drop down menu
beside the button is for setting
leveling compensation values.
29