T R"Ns4+Rt"Ti+N; Included Items; Transport Locks; Cardboard Box - Martin Professional MAC 2000 User Manual

Wash
Hide thumbs Also See for MAC 2000:
Table of Contents

Advertisement

T
R"NS4+RT"TI+N
Important! Release the transport locks before operating the fixture.

Included items

The MAC 2000 Wash is shipped in a cardboard box or in a
- or 2 unit flight case that contains the following items.
a This user manual
a Philips MSR -200 SA7DE Gold lamp Zinstalled[
a Two Omega clamp attachment brackets, -74-turn
a DMT cable with 3-pin TLR connectors
a PC lens
a Fresnel lens
a Super wide-angle lens
a 30 mm Z-.2 in.[, 40 mm Z-.6 in.[, 45 mm Z-.8 in.[ and 50
mm Z2 in.[ aperture rings
a 2 x 20 A main fuses Zfor use with -00 - -20 V power[
a 2 x -5 A main fuses Zfor use with 208 - 240 V power[
Transport locJs
The head and yoke may be locked for transportation and service. The locks are shown in Figure -. The
fixture must be unlocked before operation.

Cardboard box

Instructions for removing models that have been shipped in a cardboard box are printed on the outside of
the box. The cardboard box is not designed for repeated use and for transportation of the fixture we strongly
recommend the use of one of our flight cases.

Single flight case

3npacJing the fixture
- Remove the top of the flight case.
2 With one person on each side, lift the fixture out of the
bottom of the flight case.
3 Release the pan and tilt locks before operating.
4acJing the fixture
- Disconnect the fixture from power and allow it to cool.
2 Lock the head and yoke in the position shown in Figure 2.
3 Place the fixture in the bottom of the flight case. Place the
top section over the fixture without forcing.
Figure 1: Pan and tilt locks
Figure 2: Single unit transport position

Advertisement

Table of Contents
loading

Table of Contents