Intr+D3Cti+N - Martin Professional MAC 2000 User Manual

I
NTR+D3CTI+N
Thank you for selecting the MAC 2000 Wash. The MAC 2000 Wash is a -200 Watt moving head wash light
that provides CMY color mixing, color correction ZCTC[, two color wheels Zeach with four removable colors[,
a combined dimmer7shutter. 540\ of pan and 267\ of tilt. A motoriVed barndoor system and optional dimmer
wheel are available as a separately orderable accessory.
The MAC 2000 Wash has a Fresnel lens fitted as standard, and is also supplied with a PC lens and a super
wide-angle lens. A motoriVed Voom provides beam angle ranges of --\ through to 40\ Zin the standard
Fresnel configuration[, -2\ through to 34\ Zwith the PC lens fitted[, or 66\ through to 80\ Zwith the super
wide-angle lens fitted[.
The MAC 2000 Wash is fitted with an electronic ballast that provides flicker-free operation and an
economical power-saving mode. The switch mode power supply unit is auto ranging to match -00 - -20 V or
208 - 240 V nominal AC power. It adapts automatically to 50 or 60 HV power..
Note: This manual describes functionality available from version 1.7 of the MAC 2000 Wash
software. For the latest software updates, documentation, and other information about this
and all Martin Professional products, please visit the Martin website at
http://www.martin.com.
!"C 2000 'ash safety information
Warning! This product is for professional use only. It is not for household use.
This product presents risks of lethal or severe inXury due to fire and heat, electric shock, ultraviolet radiation,
lamp explosion, and falls. Read this manual before powering or installing the fixture, follow the safety
precautions listed below and observe all warnings in this manual and printed on the fixture. If you have
_uestions about how to operate the fixture safely, please contact your Martin dealer or call the Martin
24-hour service hot line at `45 70 200 20-.
4rotection from electric shocJ
a Disconnect the fixture from AC power before removing or installing the lamp, fuses, or any part, and when
not in use.
a Always ground Zearth[ the fixture electrically.
a Use only a source of AC power that complies with local building and electrical codes and has both overload
and ground-fault protection.
a Do not expose the fixture to rain or moisture.
a Refer any service operation not described in this manual to a _ualified technician.
4rotection from 3K radiation and lamp explosion
a Never operate the fixture with missing or damaged lenses and7or covers.
a When replacing the lamp, allow the fixture to cool for at least -5 minutes before opening the fixture or
removing the lamp. Protect your hands and eyes with gloves and safety glasses.
a Do not stare directly into the light. Never look at an exposed lamp while it is lit.
a Replace the lamp if it becomes defective or worn out, or before usage exceeds the maximum service life.
4rotection from burns and fire
a Never attempt to bypass the thermostatic switch or fuses. Always replace defective fuses with ones of the
specified type and rating.
a ceep all combustible materials Zfor example fabric, wood, paper[ at least - meter Z39 inches[ away from the
fixture. ceep flammable materials well away from the fixture.
a Do not illuminate surfaces within 3 meters Z-0 feet[ of the fixture.
a Provide a minimum clearance of 0.- meters Z4 inches[ around fans and air vents.
a Never place filters or other materials over the lens.