Changing Color Filters - Martin Professional MAC 2000 User Manual

Changing color filters

Additional color filters can be ordered from Martin.
To ensure the best performance, lenses must be fitted with the coated surface away from the lamp.
To change a color filter:
- Disconnect the fixture from power and allow it to cool.
2 Lock the head horiVontally with the top cover up.
3 Remove the top cover of the fixture using a flathead screwdriver to unlock the four _uarter-turn screws.
4 Remove the two screws holding the color wheel module in place using a Philips screwdriver. Disconnect the
cables and lift the whole module out of the fixture.
5 Remove filters using your fingers and a soft cloth to protect the lens.
P
T O
P
T O
29 / 28
Cable connections
10