Honda CB125 Shine SP Owner's Manual page 60

● Molten grease in greasilator (visit your
Honda dealer for this service).
Saturate each chain link joint so that the
lubricant penetrates
plates, pins, bushings, and rollers.
Replacement chain:
LGB 420 BS-116L
DID 420 AD-116RB
GREASILATOR
56
CB125 Shine SP
between the
OR
Removal and Cleaning:
When the drive chain becomes dirty, it should
be removed and cleaned prior to lubrication.
link
1. With the engine off, remove the drive
chain cases (page 53) and carefully
remove the master link retaining clip
(1) with a pair of pliers. Do not bend or
twist the clip. Remove the master link.
Remove the drive chain from the vehicle.
(1) Retaining clip
2. Clean the drive chain in high flash-point
solvent and allow it to dry. Inspect the
drive chain for possible wear or damage.
¼fjVs f ua x fDyi½
Honda Motorcycle & Scooter India Pvt. Ltd.
(1)