Honda CB125 Shine SP Owner's Manual page 21

If proper adjustment cannot be obtained
by this method, see your Honda dealer.
After adjustment, push the brake arm to
confirm that there is a gap between the
rear brake adjusting nut and the brake arm
pin.
After adjustment, confirm the free play of
the brake pedal.
Gap
Cut out
correctly seated
Cut out not
seated
Other Checks:
Make sure the brake arm, spring and
fasteners are in good condition.
Honda Motorcycle & Scooter India Pvt. Ltd.
Rear Brake Fluid Level: (for CBS)
With the vehicle in a side right position,
check the fluid level. It should be above
the LOWER level mark (1). If the level is at
or below the LOWER level mark, check the
brake pads for wear (page 62).
(1)
(1) LOWER level mark
Worn pads should be replaced. If the pads
are not worn, have your brake system
inspected for leaks.
¼fupyk Lrj fpUg½
CB125 Shine SP
17