Honda CB125 Shine SP Owner's Manual page 51

(1)
(1) Spark plug cap ¼LikdZ Iyx dS i ½
(2) Spark Plug wrench
4. Check the spark plug gap (3) using a
wire-type feeler gauge. If adjustment is
necessary, bend the side electrode (4)
carefully.
The gap should be:
0.8 - 0.9 mm(0.03-0.04 in)
5. Make sure the plug washer is in good
condition.
6. With the plug washer attached, the
spark plug in by hand to prevent cross-
threading.
Honda Motorcycle & Scooter India Pvt. Ltd.
(2)
¼LikdZ Iyx js a p ½
(4)
(3) Spark plug gap
¼LikdZ Iyx xS i ½
(4) Side electrode ¼lkbM bys D Vª k s M ½
7. Tighten the spark plug:
• If the old plug is good:
1/8 turn after it seats.
• If installing a new plug, tighten it twice
to prevent loosening:
a) First, tighten the plug:
1/2 turn after it seats.
b) Then loosen the plug.
c) Next, tighten the plug again:
1/8 turn after it seats.
(3)
47
CB125 Shine SP