Cleaning - Honda CB125 Shine SP Owner's Manual

Front/Rear Turn Signal Bulb
1. Remove the turn signal lens (1) by
removing the screw (2).
2. Slightly press the bulb (3) and turn it
counterclockwise.
3. Install a new bulb in the reverse order
of removal.
(3)
(2)
(1) Turn signal lens ¼VuZ flXuy ys a l ½
(2) Screw
¼LØw ½
(3) Bulb ¼cYc½
Honda Motorcycle & Scooter India Pvt. Ltd.

CLEANING

Clean your vehicle regularly to protect the
surface finishes and inspect for damage,
wear, and oil or brake fluid leakage.
Avoid
specifically
automobile surfaces.
They may contain harsh detergents or
chemical solvents that could damage the
metal, paint, and plastic on your vehicle.
If your vehicle is still warm from recent
operation, give the engine and exhaust
system time to cool off.
We recommend avoiding the use of high
pressure water spray (typical in coin
operated car washes).
(1)
Washing the Vehicle
1. Rinse the vehicle thoroughly with cool
cleaning products
designed
NOTICE
High pressure water (or air) can damage
certain parts of the vehicle.
water to remove loose dirt.
that are not
for vehicle or
71
CB125 Shine SP