Removal From Storage - Honda CB125 Shine SP Owner's Manual

3. To prevent rusting in the cylinder,
perform the following:
• Remove the spark plug cap from the
spark plug. Using tape or string,
secure the cap to any convenient
plastic body
positioned away from the spark plug.
• Remove the spark plug from the
engine and store it in a safe place.
Do not connect the spark plug to the
spark plug cap.
• Pour a table spoon (15-20 cm
of clean engine oil into the cylinder
and cover the spark plug hole with a
piece of cloth.
• Crank the engine several times to
distribute the oil.
• Reinstall the spark plug and spark
plug cap.
4. Remove the battery. Store in an area
protected from freezing temperatures and
direct sunlight.
5. Wash and dry the vehicle. Wax all
painted surfaces. Coat chrome with rust
inhibiting oil.
74
CB125 Shine SP
part so that it
6. Lubricate the drive chain (page 55).
7. Inflate the tyres to their recommended
pressures. Place the vehicle on blocks
to raise both tyres off the ground.
8. Cover the vehicle (don't use plastic or
other coated materials) and store in
is
an unheated area, free of dampness
with a minimum of daily temperature
variation. Do not store the vehicle in
direct sunlight.

REMOVAL FROM STORAGE

)
3
1. Uncover and clean the vehicle.
2. Change the engine oil if more than 4
months have passed since the start of
storage.
3. Check the battery voltage and charge
the battery as required. Install the
battery.
4. Drain any excess aerosol rust-inhibiting
oil from the fuel tank. Fill the fuel tank
with fresh petrol.
5. Perform all Pre-ride Inspection checks
(page 32).
Test ride the vehicle at low speeds in a
safe riding area away from traffic.
Honda Motorcycle & Scooter India Pvt. Ltd.