Brakes - Honda CB125 Shine SP Owner's Manual

NOTICE
For rear shock absorber adjustment visit
to your nearest Honda dealer.
Standard position: 2
(3)
(1)
(2)
(1) Shock absorber
¼"kkW d ,ctkcZ j ½
(2) Pin spanner ¼fiu LiS u j½
(3) Spring preload adjuster
Honda Motorcycle & Scooter India Pvt. Ltd.
¼fLiz a x iz h y®M ,MtLVj½

BRAKES

Front Brake (Disc & CBS)
This vehicle has a front hydraulic and rear
mechanical drum brake.
As the brake pads wear, brake fluid level
drops.
There are no adjustments to perform, but
fluid level and pad wear must be inspected
periodically. The system must be inspected
frequently to ensure there are no fluid leaks.
If the control lever free travel becomes
excessive and the brake pads are not worn
beyond the recommended limit (page 62),
there is probably air in the brake system
and it must be bleed. See your Honda
dealer for this service.
Front Brake Fluid Level:
With the vehicle in an upright position,
check the fluid level. It should be above the
lower level mark (1). If the level is at or
below the lower level mark (1), check the
brake pads for wear (page 62).
13
CB125 Shine SP