Switches & Indicators; Leds - ADRF Duo-i6515NM User Manual

Duo-i6515/6525/8030NM
User Manual V1.6
2.2 Switches & Indicators

2.2.1. LEDs

The Duo-i6515/6525/8030NM has three LEDs on the front panel of the
repeater as show below in Figure 4.
Figure 4 – Duo-i6515/6525/8030NM Repeater LED View
POWER
If the LED is lit GREEN, it indicates that there is AC power to the repeater.
SOFT FAIL
If the LED is lit YELLOW, it indicates that there is a soft fail alarm in the
system. The detailed alarm information can be viewed via the local web GUI.
In the event of a soft fail alarm, the repeater will still function, but the alarm
needs to be addressed promptly.
HARD FAIL
If the LED is lit RED, it indicates that there is a hard fail alarm in the system.
The detailed alarm information can be viewed via the local web GUI. In the
event of a hard fail alarm, the repeater will not function and immediate
attention is required.
Advanced RF Technologies, Inc. Proprietary Document Page 12 of 40