Repeater Install - ADRF Duo-i6515NM User Manual

3.4 Repeater Install

If you click on the
Band Selection
Simply click on the desired operating bandwidth.
SNMP
Type in the assigned Site/Cascade ID and Manager IP Address.
Default Site ID is ADRF.
Default Manager IP address 100.10.10.100
Repeater
Click the Install
It may take up to 3 minutes to complete the process. You will see a gradual
progress bar display. After the process is completed, a pop-up window will
display "Installation Successfully Completed" messa
lick on Status
C
"Installed
."
If the Duo-i6515/6525/8030NM detects a problem during the installation process,
it will show a prompt message, e.g., "Low RSSI." Please follow the instructions
and address the problem to finish the installation process.
If the problem persists, please contact our technical support.
Advanced RF Technologies, Inc. Proprietary Document
Install tab, the following window will appear:
button to automatically setup the repeater.
tab, the Installation box now changes from "Not Installed" to
Duo-i6515/6525/8030NM
User Manual V1.6
ge.
Page 25 of 40