Table of Contents
Advertisement
For this possibility of remote GSM
control of the boiler it is necessary to
buy a GSM model!
GSM module works only in the nets
with standartized GSM protocol.
P31-Selection of the user No. 2 responsible for
remote GSM communication with the boiler
Using this parameter it has to be inserted GSM mobile
phone number of the user responsible for remote GSM
communication with the boiler through SMS. The
number has to be inserted in the international number
format and if the number is shorter than 13 places then
it is necessary to insert for free ending place "N".
The value 0, 1, 2, ...9, N + - marking of phone number
For this possibility of remote GSM
control of the boiler it is necessary to
buy a GSM model!
GSM module works only in the nets
with standartized GSM protocol.
P32 -Selection of the user No. 3 responsible for
remote GSM communication with the boiler
Using this parameter it has to be inserted GSM mobile
phone number of the user responsible for remote GSM
communication with the boiler through SMS. The
number has to be inserted in the international number
format and if the number is shorter than 13 places then
it is necessary to insert for free ending place "N".
The value 0, 1, 2, ...9, N + - marking of phone number.
For this possibility of remote GSM
control of the boiler it is necessary to
buy a GSM model!
GSM module works only in the nets
with standartized GSM protocol.
P33 - Selection of breakdowns archive view
Using this parameter you are able to display 4
breakdowns history with its description and
frequency. Last breakdown it is possible to display on
the information display (see description information
display).
This parameter could be set only by
authorized service technique!
P34- Selection of breakdowns clearing
Using this parameter you are able to delete the
history of breakdowns.
This parameter could be set only by
authorized service technique!
26
P35 - Heating rod power output selection
A heating rod power output can be selected by selecting
this parameter the actual power output will be shown
on the display on the basis of this value.
Only the manufacturer is authorized to
set this parameter!
Advertisement
Table of Contents
