Cleaning The Flue Gas Collector Housing And Flue Gas Fan - calimax Solida PR 08 02 01 Operating Instructions Manual

(Fig. 16). You can also remove any deposits located on the heat exchanger at the
same time.
Fig. 15: Removing the baffle plate

7.3.2. Cleaning the flue gas collector housing and flue gas fan

Remove the right-hand cladding to check and clean the flue gas collector housing.
Now undo the three wing nuts (Fig. 17) and pull the flue gas fan and cover plate off
together. Deposits can now be removed with a vacuum cleaner from inside the
housing and on the impeller of the flue gas fan. Check the stove-chimney connec-
tion for deposits.
Fig. 17: Flue gas fan and fan housing
Fig. 16: Lower flues cleaning aperture
Dangerous voltage points may become accessible
when opening the cladding!
Page 27