Emptying The Ash Pan; Cleaning The Heat Exchanger; Checking The Pellet Tank For Fine Residues - calimax Solida PR 08 02 01 Operating Instructions Manual

To remove the ash from the combustion chamber during operation, pull the ash slide
out and move it back and forth 3-4 times. To thoroughly remove ash from the com-
bustion chamber, pull out the ash slide (Fig. 9) and then open the combustion
chamber door. Remove the grates located to the left and right of the burn grate
(Fig. 10). You can now push the ash into the ash pan.
Fig. 9: Using the ash slide

7.2.2. Emptying the ash pan

To remove the ash, open the ash door and pull out the ash pan (Fig. 11 and 12).
Fig. 11: Removing the ash pan

7.2.3. Cleaning the heat exchanger

The heat exchanger must be cleaned every 14
days. Open the combustion chamber door and
move the heat exchanger cleaning rods back
and forth 3-4 times (Fig. 13).

7.2.4. Checking the pellet tank for fine residues

Fig. 10: Removing the grates
The ash slide must be pushed back up to the stop after
use, otherwise air may enter the combustion chamber
from the wrong direction, preventing the stove from
operating properly!
Fig. 12: Replacing the ash pan
The ash pan must be fully inserted tightly after being
emptied, otherwise the stove will no longer operate
correctly.
Fig. 13: Cleaning rods
Page 25