Table of Contents
Advertisement
6.
Adapting
room volume to be heated
The convection air volume can only be adapted to the room volume to be heated
in the semi-automatic mode. The convection air fan speed is always coupled to the
heating output in automatic mode.
This allows you to adapt the air circulation to the room volume being heated. Very
large or very high rooms require increased air circulation to achieve a uniformly dis-
tributed temperature across the entire room.
If the heating output is set to Low the convection air fan can be set to the stages
Low, Medium or High.
If the heating output is set to Medium the convection air fan can be set to the stages
High, Medium or Low.
If the heating output is set to High the convection air fan can be set to the stages
High or Medium.
The default setting of the convection air fan is analogue to that of the set heating
output. If the heating output is set to Medium this means that the convection air fan
is also operating in the output stage Medium .
The currently selected settings are shown with a bar symbol.
6.1. Setting the heating output/convection fan
These parameters are only available in the semi-automatic operating mode!
the
convection
Press the
button.
Scroll to page K12 with the
The heating output can be set with the
The convection fan can be changed with the
tons.
Use the
button to leave the customer menu and save the
parameters.
The menu is automatically closed and the parameters
saved after 60 seconds.
air
volume
button.
or
to
the
buttons.
or
but-
Page 23
Hide quick links:
Advertisement
Table of Contents
