5.1.4. Cladding
Remove the cladding from the packaging. Pass the room temperature sensor
through the rear panel. Push the lower lugs of the cladding into the lower bracket
(Fig. 2). Lift the cladding up and hang the upper retaining lugs into the upper
bracket (Fig. 3 and 4).
Fig. 2: Lower bracket, side panel
Fig. 4: Attaching the cladding
Fig. 3: Upper bracket, side panel
5.1.5. Cleaning tool
To hold the cleaning tool, mount the
supplied holder on the rear panel of
the stove (Fig. 5).
Fig. 5: Cleaning tool holder
Page 18