Closing The Device; Activating The Device; Verizon Activation - Novatel RTT2211 User Manual

Closing The Device

Replace the MT 3060 cover using the following steps:
1. Place the MT 3060 cover onto the base of the device as shown in the following figure.
2. Apply gentle downward pressure to the back of the cover first, and carefully slide the
cover into place.
3. Apply gentle down and forward pressure to the front of the cover until it snaps shut.

Activating The Device

Verizon Activation:

To activate with Verizon, the user must contact Verizon and provide the MEID of the device to
the provider. Once Verizon has acknowledged that the device is ready to activate, the user
will then be required to send an activation string to the network.
Send the activation string: AT+CDV*22899. This will initiate a call with the network. A
successful call will last approximately 40 seconds. If the call is terminated within 10-15
seconds, the call was not successful. Multiple attempts might be required. If the call is not
successful after a few attempts, please check the MEID of the device and compare it with the
MEID provided to the provider.
To verify that the activation has successfully completed, attempt a voice call AT+CDVxxxxxx.
If the call is successful, then the over-the-air provisioning was successful.
As part of the activation process, the network will download a new PRL. The device will reset
after the PRL is successfully reset to allow the new PRL to take effect.
Figure 3-5 MT 3060 Cover Replacement
- 21 -