2-Way cassette type
(cont.)
No
Parts
7
Front panel
1) Unscrew 2 screws of the Holder Motor fixed
2) Unscrew 2 screws of the Step-Motor, and
3) Detach the cable clamp screw.
4) Push the hook of case PCB to the both sides
Procedure
on the Panel, and detach the Holder Motor.
The Panel, and detach the Holder Motor.
detach the Step-Motor from the Panel.
and detach the case from the Panel.
- 93 -
Disassembly and Reassembly
Remark