Samsung AVMKH020EA0 Service Manual page 65

4
Installation
4-3-2. Specification 2
G Spec 2 model can set max. 40 the indoor unit address.
SW01
I MAIN ADDRESS SETUP
1. The main switch(SW01,SW02) is a basic address for the communication between indoor unit and outdoor unit.
The products operate normally when this address is set.
2. The address is set from 00 to 39 by the combination of SW1 and SW2.
It is impossible to have a same address from 0 to the last.
3. Before the installation of indoor unit, mark the address of indoor unit onto the drawing for address setup.
SW01
0, 1, 2 ~ 9
0, 1, 2 ~ 9
I RMC ADDRESS SETUP
1. SW03 RMC switch is an address setup switch to control the indoor unit operation by the wired remote control and
centralized controller.
2. If the wired remote control and centralized controller is used, SW03 K1, K2 switch setup should be needed.
3. SW03 RMC switch setup is not needed when the wired remote control and centralized controller is not used.
N
ote • PCB type may be different according to the model.
SW02 RMC
Indoor unit
SW02
Address
00 ~ 09
10 ~ 19
K1 K2 K3 K4
K5 K6 K7 K8
SW04 SW05
SW01 SW02
0, 1, 2 ~ 9
0, 1, 2 ~ 9
- 64 -
K9 K10
SW06
Indoor unit
Address
20 ~ 29
30 ~ 39