Ceiling type
(cont.)
No
Parts
5
Stepping Motor
1) Remove the screws in rear side of Front
2) Remove the screws as shown in picture.
3) Disassemble the Blade and Stepping Motor
1) Remove the screws in rear side of Front
6
Display PCB
2) Disassemble Display PCB assembly
3) Disassemble the Display PCB.
Procedure
Cover assembly as shown in picture.
assembly and remove the screws Stepping
Motor.
Cover assembly as shown in picture.
and disconnect wire.
- 143 -
Disassembly and Reassembly
Remark