Wall-mounted type
(cont.)
No
Parts
2
Ass'y
1) Separate the drain hose from the extension
Tray Drain
2) Take the display PCB out.
3) Pull Tray Drain out from the Back Body.
3
Electrical Parts
1) Take all the connector of PCB upper side
(Main PCB)
2) Separate the outdoor unit connection wire
3) If pulling the Main PCB up. It will be taken
4
Heat Exchanger
1) Loosen the fixing earth screws of right side.
2) Separate the connection pipe.
3) Separate the bush body at the upper side
4) Loosen the fixing screws of left side.
5) Lifting the Heat Exchanger up a little to push
Procedure
Tray Drain.
(Right of indoor unit)
out. (Inclusion Earth Wire)
from the terminal block.
out.
and holder at the rear side.
the up side for separation from the Indoor
Unit.
- 123 -
Disassembly and Reassembly
Remark