5
Disassembly and Reassembly
5-1-4. Duct type (Low silhouette)
No
Parts
1
Filter-Pre
1) Disassemble screws of indication part and
2) Turn the Plate Handle by hand when
3) When pulling the Filter-Pre handle,
✳ Be sure to remove the cushion on the
1) After disassembling places indicating
Blower
2
&
Duct
Procedure
then assemble the direction of
2 Plate-Handle places by use of screw
as shown in 2).
removing the Filter-Pre.
the Filter-pre can be assembled.
marked part after initial installation.
(It cause the damage of noise).
screws, detach Ass'y Cover Bottom.
- 104 -
Remark