Polycom Diagnostic Handset 1610 Setup Manual page 10

1415 0200-ed2:14473_KT_1415 0200 ed1
E
Y/N
1
EMC: Equipment Manufacturer's Code
FPN: Fixed Part Number
RPN: Radio Fixed Part Number (Base
number)
EIC: Equipment Installer's Code
FPS: Fixed Part Sub Number
POC: Public Operator Code
GOP: GSM Operator Code
FIL: Fill bits fixed 16-bit 0101... pattern
The ARI Number of a DECT System
The ARI number of a residential system
characterised by the octal number start-
ing with 0.
• Divide the octal number by 2.
The ARI number of a business system is
characterised by the octal number start-
ing with 0.
• Divide the octal number by 4.
The reason to this is because of an
ARI- Bs 31 bits have to be converted
into a 10 digit hex number (ETSI 300
175-6).
• After the division a convert into a hex
number is maked.
i.e.
10002001630o
To be able to write the hex values A B C
D E F you have to press the keys 1 2 3 4
5 6 down respectively. The keys will togg-
le between the value every 1.5 seconds.
10
RFPI E
PARI
E FIL FPN RPN
3 16 12
06-12-2007
NO
8 = 40 bits
100200E6h
15:2